您要查找的是不是：
- Torque values listed are typical or alloy steel bolts (approximately 100,000 psi yield strength) used with carbon or intermediate alloy steel valves. 所列的扭矩值是标准值或适用于合金钢螺栓(屈服强度大约为100,000 psi),配置在碳钢或中间合金钢阀门上。
- Mo alloy layer is formed by double glow plasma alloying process. 然后作固溶处理,使金属间化合物溶于基体中;
- This paper ir/troduces the physical property and application characteristic of rare-earth silicide intermediate alloy produced by thermal reduction method. 本文介绍了使用碳热还原一步法生产的稀土硅化物中间合金的物理特性和应用特点。
- Study on the Product Process of High Zr-Mg-Zr Intermediate Alloy 高锆镁锆中间合金工艺研究
- rare earth-magnesium intermediate alloy 稀土-镁中间合金
- The formation mechanism of polymer solid alloy and the theoretical model of alloying process were discussed based on mechanical alloying and mechanochemical principles. 以机械合金和力化学原理为基础，讨论了高分子固体合金的形成机理和合金化过程的理论模型。
- Optimization on Material Preparation and Process of High-Silicon Intermediate Alloy 高硅中间合金制备材料及工艺的优化
- Nitrogen alloying process was set up by theories of nitrogen dissolved and degassed in stainless steel refined in AOD. 介绍了AOD炉运用氮气在不锈钢中溶解与脱除理论所开发的氮合金化工艺。
- Choice of metallization scheme, surface pretreatment and alloying process are discussed. 本文讨论了金属化方案的选择、表面预处理和合金化处理等几个问题,回顾了近年来p型GaN欧姆接触的研究进展。
- The principle,discharge mode and alloying process of double glow discharge plasma surface alloying process were introduced particularly. 详细介绍了双层辉光离子渗金属技术的基本原理、放电模式及渗金属过程。
- The type, constitutes, function, structure, principle of double glow plasma discharge alloying process equipment for surface was briefly introduced. 简要介绍了双层辉光等离子表面合金化设备的类型、组成、功能、结构、原理等。
- Rapid Redox Titrimetric Determination of Chromium in Cr-Cu Intermediate Alloy 快速氧化还原滴定法测定铬铜中间合金中铬
- By hollow cathode plasma sintering process, high temperature and fast sintering was implemented, at the same time alloying process was introduced. 采用空心阴极等离子烧结工艺,实现对铁基粉末的高温、快速烧结,同时引入渗金属工艺。
- Controlled concentrations of specific donors or acceptors may be intentionally added into materials to form extrinsic semiconductor using various techniques. Such an alloying process in semiconducting materials is termed doping. 控制特定施主和受主原子的浓度，进而运用各种方法能动地填加，这种在半导体材料中加入合金成分的过程称为掺杂。
- Present Condition and Analysis for Intermediate Alloy for Aluminum Alloy Grain Refinement 用于铝合金晶粒细化的中间合金研究现状与分析
- For2Cr13 valve sealing face by double glow plasma W alloying process,carburizing , quenching and tempering process, the results show its machining size is little, its hardness is high and its static pressure lifetime is long. 结果表明经双层辉光离子渗钨、渗碳和淬火回火处理的2Cr13阀门密封面加工量小、硬度高、静压寿命长。
- It's an alloy not readily drillable. 这是不易钻洞的合金。
- I've passed the intermediate level exam of Japanese. 我已经通过了日语的中级水平考试。
- Brass is an alloy of copper and zinc. 黄铜是铜和锌的合金。
- DISCUSSION ON SMELTING MuSi ALLOY PROCESS WITH BURMESE ORE 使用缅矿冶炼锰硅合金的工艺探讨
